Posted by admin | Posted in Wind Turbines | Posted on 30-12-2008
Tags: airfoil, energy, turbine, wind, wing
I made a small wind turbine blades with PVC 1.5 m rotating in the wrong direction aerodynamics What can I do?
blades wind problem of rotation of the cutting edge should turn the opposite direction of the wind direction, but what happened is that the trailing edge that is making is to produce electricity
Pull the turbine shaft and turn it around and put it back in the shaft actually answered shortly. What is having problems due to the rotating direction? Can you reverse the cables from the generator as the response of others suggested? That's a good answer if you can do that. Certainly easier than reversing the sheet, plus a function of angle of attack of the sheet may not be able to turn it around on the shaft. Thus if you could explain why the reverse direction is bad. Is this an electric generator or being used to pump water?
Non Stationary Flow Simulation over Horizonal Axis Wind Turbine Airfoil
|
|
Smoothing and scaling airfoil coordinates on a personal computer / Peter K.C. Tu, George N. Scott … |
|
|
Models of Lift and Drag Coefficients of Stalled and Unstalled Airfoils in Wind Tunnels and Wind Turbines and Wind Tunnels (NASA/CR-2008-215434) $9.04 42 page BINDER-READY / LOOSE LEAF, single-sided REPRINT document on 20 POUND paper in 65 POUND covers. BINDER-READY means that the pages are hole-punched and ready to be put in binders. The document is printed on standard copy quality paper. The back side of the pages of the document are suitable for note taking. PLEASE NOTE THE BINDER(S) ARE NOT INCLUDED…. |
|
|
Wind tunnel evaluation of a truncated NACA 64-621 airfoil for wind turbine applications (SuDoc NAS 1.26:180803) … |